4
 
Model:BFE(Flange Type)、BTE(Thread Type)
 Product accent:
  • Solenoid control valve is a kind of isolation valve, which can substitute traditional gate valves, ball valves and butterfly valves. The gate functioning is easily controlled by electrical power. The valve can be installed in fire control facility, water supply, or distant location where it's difficult to control the gate opening. The controller is directly fixed and can be easily installed on piping site. Interchangeable between manual and solenoid control.
   

Solenoid Valve Specification
【Solenoid Valve Specification】
  • Working Voltage:
    AC110V,220V 50 / 60Hz
    DC12V, DC24V
  • Allowable Voltage Range:±10%
  • Test Pressure / Working Pressure
              Cast Iron: 21 kgf/cm2 / 12 kgf/cm2
          Bronze: 21 kgf/cm2 / 12 kgf/cm2
      Ductile Iron: 32 kgf/cm2 / 20 kgf/cm2
          Stainless Steel: 32 kgf/cm2 / 20 kgf/cm2
  • Medium : Non-Corrosive Fluid
  • Applied Temperature:-15 ~ 80℃
  • Durability:500,000Cycles
  • Maximum Pressure:10 kgf/cm2
  • The working pressure should be greater than 0.5 kgf/cm2
  • This product doesn’t apply to some Rainwater recovery system
  • Generally NC type (open when switch on), special order is needed for NO type (close when switch off).
   
【Attention】
  • The working pressure should be greater than 0.3 kgf/cm2, please check the pressure before installation.
  • Please remove impurities or metal dusts inside the pipe thoroughly. If possible, please add filter to prevent pipe blocking.
  • Avoid upside-down installation under insufficient flow. (Valve’s inlet should face up)
   
電磁閥動作圖解--常開型
   
電磁閥動作圖解--常閉型

電磁閥尺寸表

Thread Type Item No L A CV
1-1/2" 40 120 200 19
2" 50 200 215 37
Flange Type Item No L A CV
2" 50 190 225 37
2-1/2" 65 212 230 85
3" 80 225 246 110
4" 100 250 255 150
5" 125 284 274 230
6" 150 310 306 450
8" 200 420 329 580
10" 250 470 373 910
12" 300 535 401 1300
14" 350 600 445 1800
16"   600 450 2300

Measuring Unit:mm

★size 18” and above specification upon request

  • Special order is needed for size over 14” or particular fluid.

Z-Tide Valves Industrial Co.,Ltd TEL: +886-7-331-1060 FAX: +886-7-331-0100 E-mail: sales@z-tide.com
Official Exporting Department: Elite Line Industrial Corporation
Z-TIDE Group Elite Line Industrial Corp
We reserve the right to change the specifications listed in catalogues and the website without notice. c 2017 Z-Tide Valves All Rights Reserved.